Mechanical supervisor technician maintenance - Mumbai

Curriculum Vitae

Personal Details:

Name: Shailendra Sham Vichare
Date of Birth:1st July 1971
Nationality: Indian
Passport No.: H 7789395 (Expiry Date: 21/12/2019)
Marital Status: Married
Home Address: Baby Niwas, House no. 4, Anand Nagar,
Ghatkopar (West), MUMBAI- 400086.

Contact Phone No: +912225001249 (IND.)/ M: +918691974671

E-mail: vshaile@yahoo.in / vshailen.vichare@gmail.com


Educational Qualification:

1)National Apprenticeship Certificate Examination passed in year Feb. 1993,
Conducted by N.C.V.T. (National Council for Vocational Training).
Completed Apprenticeship Training in M/s COLOUR-CHEM LTD, Thane, INDIA
in the designated Trade M.M.C.P. (MAINTENANCE MECHANIC CHEMICAL
PLANT). Period, 30-09-1989 to 29-09-1992.
2) Higher Secondary Certificate Examination (H.S.C.) (10+2) passed in year March,
1990. Conducted by Maharashtra State Board of Secondary and Higher Secondary
Education.

Key Strength:

•Ability to work and communicate with staff at all levels.
•Keen problem solver.
•A Team Member.
•Flexible approach to work.
•Self-motivated.
•Hands-on maintenance experience on different types of Rotary equipments such as Centrifugal Pumps, Gear Pumps, Screw Compressors, Steam Turbine, Fans, Blowers, Gearboxes, Agitators, Pestilators, Flakers, Conveyors (Screw, Belt, Roller) and DG.
•Experience in Alignment of different equipments Such as Pumps, Gearboxes, Blowers, Leveling of Vessels and Tanks.
•Experience in Maintenance and Overhauling of Utilities such as Air Compressors (reciprocating), Cooling towers, D.M. Water Plant, E.T.P. and Boiler.
•Experience in Maintenance of Stationary Equipments such as Valves, Strainers, Filters.
•Experience in Maintenance of Static Equipments such as Vessels, Columns, Reactors, Switch Condenser, Heat Exchangers, and Thermal Fluid Heater.
•Experience in Installing Mechanical Seals, and Handling of O-rings, Gaskets, Shaft Seals (Labyrinth).
•Used to Work on height to attain Gasket leak on pipe racks.
•Hands-on experience in tool room activities and Hydraulics.
•Offer extensive Maintenance Experience in all Plant activities like Shutdowns, Breakdowns, Preventive, Planned and Routine in all shifts.

Total Experience: 18 Years.

INTERNATIONAL DUCTILE IRON PIPES COMPANY (INDIPCO), Al-Jubail, Kingdom of Saudi Arabia.
From November 2008 till Date.
INDIPCO member of FAL Holdings Industrial Sector manufactures pipes, for diameters ranging from 100mm to 2200mm. The firth largest Ductile Iron Pipes Manufacturing Company in the world, with the production capacity of 200000 tons per year.
Work Experience: as SENIOR MECHANICAL TECHNICIAN- Presently involved in Erection and Commissioning of Pipe Plant Project.

•Present job involves to lead a team of well experienced technician in erecting of plant machineries hydraulic and NG- gas line repair.

•Worked with Representative of management in making technical documents for mechanical division and production department for ISO accrediting.

•Adjust functional parts of devices and control instruments, using hand tools,
levels, plumb bobs, and straight edges.
Align and balance new equipment after installation.

•Assemble, install and /or repair pipe systems and plumbing, machinery and Equipments.

•Inspect drives, motors, and belts, check oil levels, filters, strainers. Inspect, operate. And test machinery and equipment to diagnose machine malfunctions.

•Operate cutting torches or welding equipment in order to cut or join metal parts.
Set up and operate machine tools to repair or fabricate machine parts, jigs, fixtures,
and tools.

•Use tools ranging from common hand and power tools such as hammers, hoists, saws, drills, wrenches, and Jack hammer to precision measuring instruments electrical and electronic testing devices.





INDO GERMAN PETRO-CHEMICAL LIMITED, INDIA.
From March 1997 till November 2008.

Work Experience: as SENIOR MECHANICAL TECHNICIAN.
•Involved in the overall maintenance of Phtalic Anhydride and Mallic Anhydride plant of 120000 TPA. Capacity with LURGI, GMBH technology.
•Hands on experience in overhauling of Centrifugal pumps, Multistage pumps, Gear -
Pumps Make: KSB, AKAY, and KISHORE. Agitators- G/Box Make: EKATO.
•Hands on experience in overhauling of Reciprocating Compressors (INGERSOLL-RAND), Screw Compressors (ATLAS-COPCO)
•Hands on experience in maintenance of Static equipments like Boiler 10 T/hr (THERMAX), Columns, Vessels, Tanks and Heat Exchangers.
•Hands on experience in overhauling of Gear boxes (EKATO, SHANTI and GOUDA
•Hand on experience in assembly of Mechanical Seals
•Alignment of different equipments such as pumps, gearboxes and blowers
•Involved in the successful commissioning of new Phtalic A hydride plant and was a team member for installation of Mechanical Seals of centrifugal pumps to convert it from gland to Mech. Seal.
•Diagnose mechanical problems and determine how to correct them, checking blue prints, repair manuals, and parts catalogs as necessary.
•Dismantle device to gain access to and remove defective parts, using hoists, cranes, hand tools, and power tools.
•Perform routine preventive maintenance to ensure that machines and equipments continue to run smoothly, the system operates efficiently, and the physical condition of machine does not deteriorate.
•Plan and lay out repair work using diagrams, drawings, blue prints, maintenance manuals, and schematic diagrams.
•Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from stores dept.
•Grind and reseat valves, using valve grinding m/c or manually.

GHARDA CHEMICAL LIMITED, INDIA
From November 1996 to March 1997

Work Experience: As Maintenance Fitter.
•Involved in the maintenance activities of PUMPS, GEARBOXES and REACTORS along with General Chemical Plant Maintenance.
Member of maintenance team, responsible for maintenance of various types of
Pumps, gearboxes and reactors.
● Member of maintenance team, responsible for various house-keeping and safety
related projects.
•Carried out wear and tear and patch work job on glass lined vessels.
•Maintenance and preventive maintenance carried out on cooling towers.
•Leveling of vessels.
•Maintenance of condensers and heat exchangers.
•Clean and lubricate shafts, bearings, gears, and other parts of machinery.

BHARAT GEARS LIMITED, INDIA, From May 1996 to November 1996.

Work Experience:
•Worked in Production Department as Machine Operator in bevel gear cutting
section (Make of machine Orlikon USA).
•Select the proper coolants and lubricants, and start their flow.
•Start machines, and turn hand wheels or valves to engage feeding, cooling, and lubricating mechanism.
•Change worn machine accessories such as cutting tools and brushes, using hand tools.
•Extract or lift jammed pieces from machines using fingers, wire hooks, or lift bars.
•Inspect work pieces for defects and measure work piece to determine accuracy of machine operation using rulers, templates, or other measuring instruments.
•Observe machine operation to detect work piece defects or machine malfunctions; adjust machine as necessary.
•Perform minor machine maintenance such as oiling or cleaning machines, dies, or work pieces, or adding coolant to machine reservoirs.
•Position, adjust and secure work pieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
•Remove burrs, sharp edges, rust, or scale from work pieces using files, hand grinders, wire brushes, or power tools.

OMEGA FABRICATORS & CO. (HOECHST LIMITED), INDIA
From May 1993 to April 1996.

Work Experience:
•Worked as Maintenance Fitter – Carried out different maintenance activities of
Pipelines of Chemical Plant.
•Attending various jobs related to Effluent Treatment Plant.
•Laying and Fitting of water pipe line.
•Carry out routine maintenance of blister packing machines in pharmaceutical
Plants.
BOMBAY PRECISION MOULDS, INDIA
From November 1992 to April 1993.

Work Experience: Worked as Bench Fitter
•Drilling in dies and punch for water cooling.
•Fitting jobs by filing and scraping.
•Taking bearing for sealing of die and punch.



Date: Place: SHAILENDRA VICHARE. .